Sunday 29 January 2017

2017 Challenges: January

Just under the wire, here are the garments I made in January for my two little 2017 challenges.

1. Magazine Challenge: Burda 01-2017-119 Draped front knit top

This month I had the least choice that I'll have all year for this challenge, since I only had my January Burda and Knipmode magazines to choose between. As it turned out, I was spoiled for choice as I liked several of the patterns in each issue. Eventually I settled on Burda 01-2017-119, a knit top with a deep cowl neck. There must have been something similar released somewhere by a designer because oddly enough Knipmode had a nearly identical top in their January 2017 issue. I went with the Burda top because I didn't like the waist on the Knipmode version and also because I preferred the neckline/shoulder on the Burda top.

Burda 01-2017-119 -- Draped front knit top (images from Burda magazine)

As you can see, the pattern includes a little camisole top to go underneath the main top, which I must tell you is 100% essential as the drape is VERY low. However, I didn't have enough fabric to make the camisole, plus I already own about 6 camisoles that I could wear with it, so I didn't bother with it. The camisole with my finished garment is just a plain RTW one I have owned for a while.

My finished top, on Flossie
I really liked the idea of the draped neckline coming from those shoulder yokes, and in theory I still do. In practice, ugh, this was so fiddly to actually do, with a lot of sewing to which my very drapey, very slippery poly/viscose knit was not well suited. It turned out OK in the end, but it's not the best sewing I've ever done and I had to do all kinds of little hand-sewn bits to keep the whole thing neat. Definitely not a knit top pattern for the novice with knits -- it's quite hard to make it look nice.

Other than the neckline, however, this was a straightforward sew. I made my usual straight size 44, and found it to be true to size. My fabric was a slightly weird width (about 140cm) and I got the top out of 1.8m with not quite enough left over for the camisole (though I didn't try very hard -- maybe I could have if I had juggled the pattern around a bit more).

In conclusion: Remember when I said that when I was stress buying fabric I ended up (a) buying some near duplicates and (b) buying a lot of blue and navy? This fabric is the perfect example of this problem. I already have a blobby blue dot top in my wardrobe! Still, I really like the colour and there is no doubt that the style with the deep drape is a bit different from the many plain knit tops in my wardrobe, so I am quite pleased with this as challenge garment and as an addition to my wardrobe.

February's pattern for this challenge might be a bit of a problem. I could use another January pattern, of course, and I may have to because I am not wildly excited about either Burda OR Knipmode for February. Burda 02-2017 in particular seems to be full of sundresses, which, no, it's February and I live in Manchester. Not going to happen. I might see what Ottobre 02-2017, which if Ottobre run true to form should be arriving in the next couple of weeks, has to offer.

2. Wishlist Challenge: Indulgent Purple PJs (Burda 01-2017-124)

Having described my Wishlist challenge in rather grandiose terms, my first actual Wishlist project is rather tame. The entry on my list was  for "indulgent PJs", a nostalgic recreation of a garment long since discarded. Many years ago I owned a pair of stupidly expensive wide-legged silk PJ trousers that I loved and washed/wore until they were literally threadbare along the entire inner thigh seam. I have been planning to recreate those PJs for ages, but never got around to it until now.

What makes my new PJs indulgent is mainly the fabric, and this is an extra win for me in that one of my other goals in 2017 is to use some of my older fabrics that I've been hoarding because they are "too good to use". I made these PJs from one of the oldest garment fabrics I own. It's a medium-weight, very drapey silk/cotton blend shirting (with a high silk percentage, I think 60%) in a shade of purple, and I bought 3m of it in April 2012. The photos below make it look quite shiny but that's quite misleading -- it has a very subtle sheen/changeant effect from the way it's woven but it's very soft to the touch and not slippery like silk satin at all.

The fabric was moderately, though not outrageously, expensive, and for years I have been pulling it out of my stash, petting it, and then putting it away again until I found the "perfect" pattern for it. I suppose I could have sprung for a piece of pure silk, but this fabric has such a wonderful texture and drape that once I thought of using it for this wishlist item, I couldn't resist the idea.


Burda 01-2017-124 (Plus) PJs
Pattern-wise, I wanted to make something with at least a tiny bit of trim and more swish than my standard Butterick 5704, which are plain, quite straight and, compared to this pattern, rather narrower. I had actually picked out an older Burda magazine pattern but when my January 2017 issue arrived I noticed there were a couple of PJ patterns to choose from in that issue. Since I already had the pattern sheet out to trace my January 2017 magazine challenge pattern I decided to just use one of those. Of the two patterns available in this issue, I picked the Plus pattern (01-2017-124) because I preferred the waistband. It is a simple, wide-legged, elasticated waist trouser with a piped cuff detail. I haven't put in any piping on anything for years, so this was also a teeny tiny piece of skill practice. I bought white satin piping rather than make my own as I only needed a small amount.

Purple cotton/silk PJs with white satin piping
I am always a bit fussy/over-the-top in my PJ sewing because I find that's the way to ensure they survive very frequent laundering. This pair was no different in that respect -- I french seamed every seam and I've got my preferred waistband treatment down to an art at this point.

White satin piping at the cuffs
As I had a good 3m of fabric, I did consider going the distance and making a matching top but I couldn't quite squeeze the pattern I wanted on to the fabric despite really playing pattern tetris for a while. The fabric was again relatively narrow -- about 135cm -- and so although the PJ trousers fit on fine there wasn't really room for the full width of a top. In the end, to get the most use of the fabric, I doubled up on the pyjama opportunities by also cutting out my TNT PJ shorts pattern as well (Ottobre 05-2011-02).

Ottobre 05-2011-02 "Sweet Dreams" PJ shorts
In conclusion: I said in my last post on the subject that my goal with my Wishlist Challenge was to make "star" garments. Well, maybe nobody will see or appreciate them but me but these are most definitely the new stars of my pyjama drawer! :D

4 comments:

  1. As I sit here in my 60's flannel nightgown that gets worn every single week, I applaud pj stars. Nice job!

    ReplyDelete
  2. I love the idea of making star garments. I crave fewer but nicer things. PJ's are on my list but I was just going to crank them out. I think I want to make some luxury PJ's now! One thing I did decide - I was going to lengthen the top of mine so they could stand in as a night dress too. I usually get too hot under the covers wearing PJ bottoms when I sleep but I love to wear them around the house.

    Do you have any special details for sewing your preferred waist treatment? I make over the top flannel PJ's for DH. He's uber tall and everything RTW shrinks up making them look ridiculous. I copied the waist treatment from a Brooks Brothers pair I gifted him years ago (even those shrunk). No elastic - a drawstring and nice fly but I seriously wonder if they are truly comfy to wear. I'll have to ask DH this evening.

    I'm thinking your elasticized waist may be the winner for him too (and a lot simpler and easier to sew).

    Thanks for sharing this post - it's inspiring!!
























    ReplyDelete
    Replies
    1. I definitely think it is worth making nice PJs! I mean, why not, we wear them all the time and for hours at a time, and if you sew them well in the first place from good fabric they last a really long time.

      My preferred waistband is to sew the elastic into a circle, then, while stretching the elastic to fit, overlock it to the top edge of the finished PJs. Then flip it over to the inside and, again while stretching the fabric and elastic flat, coverstitching the elastic in place along the lower edge.

      I prefer that approach because my number one pet peeve in elasticated waists is when the elastic curls up and wanders around inside the casing. I find the overlock/coverstitch approach keeps it all in position. It does take a little bit of effort to sew it down flat and (as you can see with these PJs) when the fabric is lightweight you can tend to get a "lean" on you gathering, with the fabric pulling in one direction. That's a flaw I can live with in my PJs though. The other thing is that you have to get your elastic length right as otherwise they'll be too loose/tight and you won't have an easy way to adjust the length of the elastic, unlike if you put your elastic inside a casing.

      Hope that helps!

      Delete