Wednesday 14 September 2016

In which I sew A Look (Butterick 6270 & Ottobre 02-2016-05)

Today's "Look": Butterick 6270 tunic (left) and Ottobre 02-2016-05 "Fog" (right). Put together in centre!
I have mostly, up to now, avoided the skinny jean look. I did buy a pair of skinny jeans once a couple of years ago but I was stymied by the problem of how do I wear these? I always found myself feeling weirdly exposed and under-dressed if I wore skinny jeans with the same tops I wore with bootcut jeans. This is, of course, ludicrous because in actual fact the only place they fit differently/more snugly than my bootcut jeans was below the knee. No matter how silly, though, the fact was I couldn't get comfortable with wearing skinny jeans and eventually got rid of them.

This time around, I decided that if I was going to try out the skinny trousers look, I needed more of a "make some outfits" strategy. Rather than skinny jeans, I bought two pairs of RTW "jeggings" in my two main autumn/winter neutrals, black and navy. I use scare quotes because "jeggings" seem to be defined differently by every shop that sells them, meaning everything from extra stretchy skinny jeans to knit leggings with a fake jeans-style fly and topstitch printed down the outer leg. My two pairs are a mid-to-lightweight stretch woven with a faux fly and front pockets, some jeans-type topstitching details and an elasticated waist. If I decide I like this look and need more, I would probably make rather than buy next time. Based on my recent extremely positive experience with Jalie 2908, I have been thinking about getting Jalie 3461 if I decide to try making some.

By the time I bought the trousers I had also spent some quality middle-of-the-night-insomnia-sucks time on Pinterest combing through for ideas for tops, and then trying to match them up with fabric & patterns in my stash. I'm not going to lie: this was very entertaining and made being awake at 3:30am significantly more bearable. :D

Skinny black trousers and layers, all by Eileen Fisher
My first outfit is based on various photos of outfits from Eileen Fisher. Eileen Fisher is not a brand with which I am really that familiar. If they have shops here in the UK I am not aware of it, and frankly the prices would be waaaaay out of my range even if they did (e.g. ~£200 for their basic black trousers like in these photos. Hahaha, no, I don't think so.) At any rate, the actual shop notwithstanding, in the photos I pinned what I picked out specifically that I wanted to try to achieve was a relatively streamlined tunic, with another shorter and differently shaped lightweight layer over the top.

My version of the outfit therefore includes (a) black RTW jeggings; (b) a tunic length top in black and ivory patterned viscose made with Butterick 6270; and (c) Ottobre 02-2016-05, a curved hem knit top in a very lightweight, semi-opaque black knit.



Butterick 6270

The Butterick pattern, despite having a very uninspiring pattern cover, is really rather nice. As you most likely know, See & Sew patterns are a cut-down, reduced-price version of a pre-existing Butterick, McCall's or Vogue pattern, usually just one view or with a very limited variation compared to the original. I looked for the original pattern but couldn't figure out what it was*, and nobody seems to have reviewed this See & Sew version so far. I chose it for this project because my fabric, with the diagonal check design, really needed something without a lot of style lines. As it is, let us gloss gently over the question of whether I managed to match the diagonal lines at the side seams in any way (answer: no, I did not, it is a mess of disconnected lines).

* Edited to add: With thanks to SewCraftyChemist, the original pattern is Butterick 5997, which has an additional view with pintucks and some more sleeve variations.

Butterick 6270 tunic: front, back and innards showing the large facing and clean finished shoulder yoke
I made version B, with a long sleeve with a continuous lap cuff, but without a pocket or the collar, in a size 16 which is the largest size in the package. I made no changes except for my essential square shoulder adjustment.

You can see on the white version on the pattern illustration and in my version above that there is a wide facing to finish the neckline. I expected, as I cordially loathe all facings, to hate this one too. However, it actually all comes together quite well, albeit with a little bit of hand sewing of the facings to the front yoke seams. It also asks you to slip-stitch the front shoulder yokes by hand. I did not do that, preferring the burrito method for a clean finish yoke despite having to squeeze quite a lot of shirt into a very small space between the yoke pieces. I also ignored the instruction to hand-stitch the collar stand closed. I stitched in the ditch, but it must be said I don't get such a nice finish from that no matter how slow and careful I am. Probably I would prefer the outcome of hand-stitching it, even if I don't particularly enjoy the process.

Fit-wise, for straight out of the envelope except for my straight shoulder fix, it's all right I guess. The usual problems cropped up: the width of the shoulders, which are not just out but MILES out, and that annoying twisty sleeve problem. The shoulder width thing is a real pain because the effect of all those criss-crossing lines on the extra width of the fabric makes it look like I'm wearing Dynasty style shoulderpads, which is annoying. Both shoulder width and twisty sleeve issues are on my list of Things To Figure Out Sooner Rather Than Later, but eh, too late for this garment I guess! I'm still experimenting a bit with what the perfect length of top is for me with skinny trousers. This top is 76cm long and I feel like it might have been better just a little bit longer, maybe 80cm.


Ottobre 02-2016-05 "Fog" sweater front, side and back to show the curved hem
Ottobre 02-2016-05 "Fog", from the Ottobre pattern sheet

The top layer of my outfit is from a recent issue of Ottobre. The pattern, 02-2016-05, is a typical simple Ottobre knit pattern with three pattern pieces and a binding. The appeal for me was the shaped front and back hem. The original pattern has invisible zips set into the two side seams. I have seen this top made up on someone's blog, though I'm sorry to say I forget who, and I ear-marked the pattern at the time because I liked how it looked on her. She did it properly with the zips and everything, and it looked great. However, I couldn't actually imagine any circumstance in which I would ever unzip those zips, plus my knit fabric is absolutely featherweight and the thought of inserting two zips in it filled me with horror, so I left them off. And that's all there is to say about this pattern, really.

As modelled by me, with RTW black "jeggings". I got my collar stuck in my sweater in the rear view -- oops!
So that's my first top (or tops, in the case) to wear with my new jeggings made. I think I'm pleased with it -- I like it better in the mirror than in the photos but that's pretty typical for me. I have more similar projects planned to sew over the next few weeks to make these trousers functional in my wardrobe for autumn (though, there's been no actual sign of autumn here yet -- we're sweltering through the hottest September in decades here right now. It's meant to start being more normal temperatures from this weekend but still probably too warm for this outfit!) I'm also slowly creeping through the preparations to start making that camel coloured jacket, though, so most likely the start of that will be up next.

3 comments:

  1. The 'original' top is Butterick 5997.

    I LOVE THIS SO MUCH!!! The proportions are perfect, I love the fit of everything, and it just looks cool!

    ReplyDelete
    Replies
    1. Thank you!! I am so pleased by how this outfit came out! :D And also for the pattern information, which I have added to the post.

      Delete
  2. This is a great outfit! I really enjoy reading about your thought process and sewing process. I suppose that's because it's quite a bit like mine, although I probably don't finish as many sewing projects as you do. ;-) That process of weaving back and forth between desired image, pattern, fabric, development of technical skill, and success of the final outcome (or lack thereof) is a lot of the fun of the creative experience of making things, whether the clothing continues in the wardrobe or not. Like you, I've used sewing to test out new styles and found them wanting. No matter how much I like the look, those waterfall necklines don't work on me, although an off-center wrap closure or a slightly extended diagonal front closure both do. Or maybe it's just that I don't like all that flapping fabric. I still think that style looks great on other people, but I know to leave it there. And then there's so much satisfaction in being able to find your own direction and improve on what's in the marketplace through making it yourself, whether you care about fit, fabric, or detail. Or all of them. Great work! Carry on!

    ReplyDelete